View PLQ08_344157.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PLQ 08 PLQ 1
FAST RECOVERY RECTIFIER DIODES
VERY FAST FORWARD AND REVERSE RECOVERY DIODES
SUITABLE APPLICATION SWTCHING POWER TRANSISTORS DRIVER CI R CU I T S ( SERI E S DI O D ES IN ANTISATURATION CLAMP SPEED UP DIODE IN DISCRETE DARLINGTON...) THYRISTORS GATE DRIVER CIRCUITS HIGH FREQUENCY RECTIFICATION ABSOLUTE RATINGS (limiting values)
Symbol IFRM IF (AV) IFSM Ptot Tstg Tj TL Parameter Repetive Peak Forward Current Average Forward Current* Surge non Repetitive Forward Current Power Dissipation* Storage and Junction Temperature Range Maximum Lead Temperature for Soldering during 10s at 4mm from Case tp 20s Ta = 25C = 0.5 tp = 10ms Sinusoidal Ta = 25C
F 126 (Plastic)
Value 20 1 20 1.7 - 40 to 125 230
Unit A A A W C C
Symbol VRRM VRSM
Parameter Repetitive Peak Reverse Voltage Non Repetitive Peak Reverse Voltage
PLQ 08 80 80
PLQ 1 100 100
Unit V V
THERMAL RESISTANCE
Symbol Rth (j - a) Junction-ambient* Parameter Value 60 Unit C/W
* On infinite heatsink with 10mm lead length.
November 1994
1/5
PLQ 08/PLQ 1
ELECTRICAL CHARACTERISTICS STATIC CHARACTERISTICS
Synbol IR Tj = 25C Tj = 100C VF Tj = 25C IF = 1A Test Conditions VR = VRRM Min. Typ. Max. 10 0.5 1.1 Unit A mA V
RECOVERY CHARACTERISTICS
Symbol trr tfr Tj = 25C VR = 30V Tj = 25C Measured at 1.1 x VF Test Conditions IF = 1A See figure 12 IF = 1A diF/dt = - 50A/s tr = 20ns Min. Typ. Max. 50 50 Unit ns ns
2/5
PLQ 08/PLQ 1
Figure 1. Power losses versus average current. Figure 2. Allowable DC current versus ambient temperature.
Figure 3. Non repetitive surge peak current versus number of cycles.
Figure 4. Transient thermal impedance junction-ambient. Printed circuit versus pulse duration (L = 10 mm).
Figure 5. Voltage drop versus forward current.
Figure 6. Voltage drop versus forward current.
3/5
PLQ 08/PLQ 1
Figure 7. Capacitance versus reverse voltage applied. F ig u re 8. T hermal resis tan ce junction-ambient versus lead length.
Figure 9. Recovery time versus diF/dt.
Figure 10. Peak reverse current versus diF/dt.
Figure 11. Dynamic parameters versus junction temperature.
Figure 12. Measurement of trr (fig. 8) and IRM (fig. 10).
4/5
PLQ 08/PLQ 1
PACKAGE MECHANICAL DATA F 126 (Plastic)
B note 1 E
A
B E note 1
/ OC
/ OD
note 2
OD /
DIMENSIONS REF. A B C D E Millimeters Min. 6.05 26 2.95 0.76 3.05 0.86 1.27 Max. 6.35 Inches Min. 0.238 1.024 0.116 0.029 0.120 0.034 0.050 Max. 0.250 NOTES
1 - The lead diameter D is not controlled over zone E 2 - The minimum axial lengh within which the device may be placed with its leads bent at right angles is 0.59"(15 mm)
Cooling method: by convection (method A) Marking: type number Weight: 0.4g
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics.
(c) 1994 SGS-THOMSON Microelectronics - Printed in Italy - All rights reserved. SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - United Kingdom - U.S.A. 5/5

▲Up To Search▲

Price & Availability of PLQ08

	To Download PLQ08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .